Fiberglass Reinforced Polyester 5mm-60mm Anti-static Pom Plastics Esd Delrin Sheet Pom Sheet For Sealing Member Bearing
follow features:
1. Good overall performance,and coloration,high strength reach to metal.
2. Tensile strength,flexural strength,creep resistance and fatigue resistance.
3. Low coefficient of friction. 4. Excellent chemical resistance.
Applications:
POM is widely applying to cars,electronics,clothing,medical treatment,machinery and so on. For producing all kinds of sliding rotating machineries,precision parts,gears and bearings etc.
POM Certificate Of Quality |
| | Test situation | Test method | Test data | Unit |
| Basic property | Density | | ASTM D792 | 1.42 | g/cm3 |
| Water absorb | 24hrs soak +73℉(+23℃) | ASTM D570 | 0.25 | % |
| Water absorb | Equi1.50%R.h.+73℉(+23℃) | ASTM D570 | 0.22 | % |
| Water absorb | Soak F point +73℉(+23℃) | ASTM D570 | 0.9 | % |
| | No notch impact strength | 23℃ | D256 | >5300 | j/m |
| Compression elasticity | 73°F@10%Def. | ASTM D695 | 18 | Mpsi |
| Compression elasticity | 23℃@10%Def. | ASTM D695 | 124 | Mpa |
| Deformation on load | 2000psi@+122□H(14Mpa@50℃) | ASTM D621 | 0.5 | % |
| Curving surrenders strongly | 73℉ | ASTM D671 | 4.7 | Mpsi |
| Curving surrenders strongly | 23℃ | ASTM D671 | 32.4 | Mpa |
| lzod impact strength | 40℉ | ASTM D256 | 1.8 | ft.lb/in |
| lzod impact strength | 40℃ | ASTM D256 | 96.1 | j/m |
| lzod impact strength | 73℉ | ASTM D256 | 2.3 | ft.lb/in |
| lzod impact strength | 23℃ | ASTM D256 | 123 | j/m |
| Tensile impact resistance | 73℉ | D1822Long | 170 | ft.lb/in2 |
| Tensile impact resistance | 23℃ | D1822Long | 350 | Kj/m |
| No notch impact strength | 73℉ | ASTM D256 | >100 | ft.lb/in |
| Tensile Strength rate | 68℉(-55℃) | ASTM D638 | 38 | % |
| Tensile Strength rate | 73℉(+23℃) | ASTM D638 | 75 | % |
| Tensile Strength rate | 158℉(+70℃) | ASTM D638 | 230 | % |
| Tensile Strength rate | 212℉(+100℃) | ASTM D638 | >260 | % |
| Tensile Strength rate | 250℉(+122℃) | ASTM D638 | >260 | % |
| Elasticity range | 68℉ | ASTM D638 | 14.7 | Mpsi |
| Elasticity range | 55℃ | ASTM D638 | 101 | Mpa |
| Elasticity range | 73℉ | ASTM D638 | 10 | Mpsi |
| Elasticity range | 158℉(+70℃) | ASTM D638 | 6.9 | Mpsi |
| Elasticity range | 70℃ | ASTM D638 | 47.5 | Mpa |
| Elasticity range | 212℉ | ASTM D638 | 5.2 | Mpsi |
| Elasticity range | 100℃ | ASTM D638 | 35.9 | Mpa |
| Elasticity range | 250℉ | ASTM D638 | 3.8 | Mpsi |
| Elasticity range | 122℃ | ASTM D638 | 26.2 | Mpa |
| Elasticity coefficient | 73℉ | ASTM D638 | 450 | Mpsi |
| Elasticity coefficient | 23℃ | ASTM D638 | 3100 | Mpa |
| Shearing force | 73℉ | ASTM D732 | 9.5 | Mpsi |
| Shearing force | 23℃ | ASTM D732 | 65.5 | Mpa |
| Winding coefficient | 68℉ | <25℃ | 530 | Mpsi |
| Winding coefficient | 55℃ | <25℃ | 3650 | Mpa |
| Winding coefficient | 73℉ | <25℃ | 380 | Mpsi |
| Winding coefficient | 23℃ | <25℃ | 2620 | Mpa |
| Winding coefficient | 158℉ | <25℃ | 225 | Mpsi |
| Winding coefficient | 70℃ | <25℃ | 1550 | Mpa |
| Winding coefficient | 212℉ | <25℃ | 130 | Mpsi |
| Winding coefficient | 100℃ | <25℃ | 895 | Mpa |
| Winding coefficient | 250℉ | <25℃ | 90 | Mpsi |
| Winding coefficient | 122℃ | <25℃ | 620 | Mpa |
| Curving surrenders strongly | | ASTM D790 | 14.3 | Mpsi |
| Curving surrenders strongly | 218℉ | ASTM D790 | 98.6 | Mpa |
| Compression elasticity | | ASTM D695 | 5.2 | Mpsi |
| Compression elasticity | | ASTM D695 | 35.9 | Mpa |
| Tensile Strength | | ASTM D-638 | 68.9 | Mpa |
| Rockwell hardness | | ASTM D785 | M94,R120 | |
| | Insulation Strength | Short Time,90mils | ASTM D149 | 500 | V/mil |
| Insulation Strength | Short Time,2.3mm | ASTM D149 | 1.97 | MV/m |
| Friction coefficient | +73℉(+23℃)Static | | 0.20 | washertest3 |
| Friction coefficient | +73℉(+23℃)Dynamic | ThrustWasher | 0.35 | |
1.Do you test all your goods before delivery? A: Yes, we have 100% test before delivery 2.Can you produce according to the samples? A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
3.Are you trading company or manufacturer ? A: We are a manufacturer, We have more than 32 years experience in producing electrical insulation material.
4.Why choose us?
A:(1)We have adequate can save your time and cut down your cost. (2)Have many kinds of insulation material to meet your demand. (3)Also can customized machine according to clients drawing. (4)Have professional QC team and test tools which can guarantee your quality.
